Hi-end Carbon BMX Racing Components

IKON 20" MINI/JUNIOR CARBON FORK

1" STEERED TUBE
Designed for frame with a 1″ headset.

REINFORCED CARBON 10MM DROPOUTS
Designed for 10mm bolts axle (3/8″ axles).

FEATURES

  • Uni Directional Toray T700 Carbon Fiber weave
  • Aero Tapered fork legs and aero rear spoiler
  • UD Toray T700 Carbon Fiber 1″ steer tube
  • Reinforced Toray UD Carbon fiber 10mm Dropouts

SPECIFICATIONS

  • Material: Toray UD Carbon fiber
  • Steerer Material: Toray UD Carbon fiber
  • Threadless steer tube: 1"
  • Steer tube length : 165mm
  • Dropouts: Toray UD Carbon fiber
  • Axle : 10mm – 3/8″
  • Axle to crown: 305mm
  • Offset: 28mm
  • Weight: 304 g / 10.7 oz (without top cap)

 

Rider Weight Limit : 99 lbs / 45 Kg
Maximum axle tightening torque : 6 N.m

Color Options

Black/WhiteBlack/RedBlack/BlueBlack/Grey

IKON 7075-T6 Alloy Mini Top Cap included
Weight: 8g / 0.3 oz

The IKON Mini/Junior fork is the ultimate BMX race for the little racers of BMX!

The IKON Mini/Junior fork features a full Toray UD Carbon 1″ Steer tube as well as Full Toray UD carbon construction including the 10mm drop outs. This helps make the fork one of the lightest forks available for BMX racing. The IKON Mini/Junior fork comes with an 7075-T6 Alloy lock cap and the steer tube has a treaded Alloy insert thats integrated into the steer.

The IKON Mini/Junior fork works with 1” internal diameter Headset. Many Headsets in the 1” internal diameter bearing size are offered for both 1” or 1-1/8″ head tubes. Lower Bearing Race is needed to be used with the IKON Mini/Junior fork.

IKON forks are like no other Carbon fork offered today. Due to the hand laid natural Toray UD CARBON, the IKON fork has a unique look to it, unlike some types of traditional carbon fiber. The IKON Carbon is laid in a direction for optimal strength so there is non uniform carbon pattern and finish that will differ from fork to fork with its Matte finish.

Aero carbon tapered legs

Aero racing rear spoiler

Carbon steer tube

Reinforced 10mm Dropouts

COLOR OPTIONS

IKON Carbon Steer Tube Torque Spec Info:
We advise to use a torque wrench when installing the IKON fork and tighten to 5Nm. If the stem’s side bolts are over-tightened, you maybe able to /damage the carbon steerer tube.